Transmission line Angle Steel Tower Hot Dip Galvanization Electric
Power Tower
1. Production decription
we are professional manufacturer of transmission angle steel towers
used in high voltage AC and DC systems .
Heigth from 9m to 100m
Transmission angle steel towers Voltage from 10-1000KV
The transmission angle steel towers meet ASTM Standards,GB/T
standards and related standards .
Steel grades
Tower legs: Chinese standard Q345B, which equal to ASTM A572 Grade
50
Others members: Chinese Q235B, which equal to ASTM A36
Bolts: Chinese grade 6.8 and 8.8, which equal to ASTM A394
Dimension and tolerance for angle : GB/T1591-1994, Equal to EN
10056-1/2
Hot dip galvanization: GB/T 13912-2002, which similar to ASTM A 123
The welding :AWS D1.1 or CWB standard
Qingdao Liangta Steel Structure Co.Ltd is a professional
manufacturer in angle steel tower from the year 2009.
We use first class production line and have complete qualtiy
control measurements.
1. We make sure every your requirement will be answered in 24
hours.
2. Customized design is available.our engineer can design drawings
as your requirment.
3. After sales service. We can help to install the angle steel
tower .If needed ,we even can supply
an engineer to the site.
4. Professional factory direct :Best price and timely delivery can
be assured.
5. Convenient transportation.Located near the Qingdao international
sea port and airport.
The transportation cost is low.
2. Product capacity
We have 5 auto production line for lattice steel towers
Manufacturing,We can supply 3000 tons lattice steel tower
every month .Else we have enogh site for installing more production
line if needed.
3. Technical support
Our engineer and drawer has lots of designing ,lofting experience
of lattice steel towers .
Which we can supply a overall solution of all the towers .
| Service you can get from our engineer | tower design,tower lofting ,tower weight calculation and loading
plans |
| Software they used | TTA,STWXP,TMA,LMA,Daoheng |
4. Quality control
We have very strict quality control in every angle steel towers .
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
5. Trial assembly
We usually has two ways of trial assembly for lattice steel towers
: trial assembly before galvanzation
and after galvanization.
6. Hot dip galvanization and painting
7. Package and delivery
Package we usually do as our clients requirment .Usually for angle
steel towers,We use steel wire to make it into bundle and use
special material to protect the Zinc.
8. Company introduction
Qingdao Liangta Steel Structure Co., Ltd. ,established in year
2009,is a leading professional manufacturer in the field of
transmission steel towers (the voltage up to 1000kv),
telecommunication towers, monopoles, substation structures and
rooftop towers. We also supply steel profile products as per
customers 'requirement.
The factory located in Jiaozhou bay of Qingdao, covered an area of
over 60,000 square meters with an annual production capacity 40,000
tons.
Location:
Less than one hour drive from Qingdao International Airport, 1 hour
drive from Qingdao sea port.
• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems
Certificate: OHSAS 18001:2007
We also have many experiences of foreign projects, like
Philippines, Myanmar, Iraq, Mauritania and so on.
Welcome to contact us ,we make sure your every question will be
answered in time .
Certificate:
9. Product catalogue:
