Hot Dipped Galvanized Communication Antenna Tower Cellular Mobile
Phone Microwave Tower
1. Production decription
| Mobile cell tower |
| 1. Design Code | TIA/EIA-222-G/F |
| Structure Steel |
| 2. Grade | Mild Steel | High Tensile Steel |
| GB/T 700:Q235B | GB/T1591:Q345B |
| ASTM A36 | ASTM A572 Gr50 |
| EN10025: S235JR | EN10025: S355JR |
| 3. Design Wind Speed | 0-300KM/H |
| 4. Allowable deflection | 0.5 ~1.0 degree at operational speed |
| 5. Tension strength (Mpa) | 360~510 | 470~630 |
| 6. Yield strength (t≤16mm) (Mpa) | 355 | 235 |
| 7. Elongation (%) | 20 | 24 |
| Bolts & Nuts |
| 8. Grade | Grade 4.8, 6.8, 8.8 |
| 10. Standards for mechanical properties |
| 10.1 Bolts | ISO 898-1 |
| 10.2 Nuts | ISO 898-2 |
| 10.3 Washers | ISO 6507-1 |
| Welding |
| 11. Method | CO2 Shielded Arc Welding & Submerged Arc Welding(SAW) |
| 12. Standard | AWS D1.1 |
| Marking |
| 13. Method | Hydraulic Press Stamping |
| Galvanizing |
| 14. Galvanization standard of steel sections | ISO 1461 or ASTM A123 |
| 15. Galvanization standard of bolts and nuts | ISO 1461 or ASTM A153 |
Data of the microwave tower as following:
Height : 5-100M
Wind Pressure: 0-300 KM/H
Material :
Q345B/A572, Gr50 /S355JR minimum yield strength >=345MPA;
Q235B/A36/S235JR, minimum yield strength>=235MPA
Details & Shape : Can be designed as per customer's requirement
Good's Description : Cable and Ladder can be assembled by
customer's requestment
Surface : Hot Dip Galvanization or color painting
Connection : Overlapping or flange connection
Galvanizing Standard: EN ISO 1461,ASTM/A123 or equivalent
Working & Resting Platform Quantity: 1-3 PCS
Antenna Support: 3-18 PCS
Microwave Dish: 3-18 PCS
Certificate : ISO9001-2015,ISO14001-2015,OHSAS45001-2015,SGS
Welding Standard : BSEN287, BSEN288 or equivalent
Fasteners: Grade 8.8,grade 6.8 or grade 4.8
2. Production capacity
| production capacity per month | 3000 tons |
3. Technical support
| Service you can get from our engineer | tower design,tower lofting ,tower weight calculation and loading
plans |
| Software they used | TTA,STWXP,TMA,LMA,Daoheng |
4. Quality Control
Material incoming control:chemical and physical test
Zinc coating thinknes inspection
5. Trial assembly
We usually has two ways of trial assembly: trial assembly before
galvanzation and after galvanization
6. Hot dip galvanization and painting
7. Package and delivery
8. Company introduction
Qingdao Liangta Steel Structure Co., Ltd. ,established in year
2005,is a leading professional manufacturer in the field of
transmission line towers (the voltage up to 500kv),
telecommunication towers, monopoles, substation structures and
rooftop towers. We also supply steel profile products as per
customers 'requirement.
The factory located in Jiaozhou bay of Qingdao, covered an area of
over 60,000 square meters with an annual production capacity 60,000
tons.
Location:
Less than one hour drive from Qingdao International Airport, 1 hour
drive from Qingdao sea port.
• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems
Certificate: OHSAS 18001:2007
We also have many experiences of foreign projects, like
Philippines, Myanmar, Iraq, Mauritania and so on.
Welcome to contact us ,we make sure your every question will be
answered in time .
Catalogue of certificatge as followings :
9. Product catalogue:
